|
|
|
There are no lights displayed or sound effects upon ball
impact or Strike/Ball/Inning lights are not working.
Plug may have come loose from the jack.
Connect the plug firmly.
Plug may be dirty. Clean the plug with a dry, soft cloth
periodically.
Make sure the batteries are new and thus are inserted correctly.
The connecting cable may be short-circuited. Check the entire
cable and if it appears worn or broken, please contact your local
dealer immediately.
The target area may be short-circuited. (Please refer to Section
"2.1 Assemble with the supporting poles included" for solving the
problem.)
Lights stay illuminated or voice sounds repeatedly upon impact.
The target area may be short-circuited. This may be caused after
a long period of storage. Smooth the face flat with hands again
to equally isolate the circuits inside the mat. (Please refer to
"2.1 Assemble with the supporting poles included" for solving the
problem.)
The scoreboard has s delayed response, or the voice sounds and
lights register balls and strikes incorrectly.
The battery power is getting low. Replace batteries.
If the ball is pitched at a very low speed, the ProPitch/Strike
em Out may not register all pitches.
The use of aditional rubber straps will help this condition.
Should any of these problems persist after you have made these checks,
contact your nearest ProPitch/Strike em Out dealer, place of purchase,
or write us for more solutions supported.
|
|
|
|
|
|
|
|
| |
|
|
|
